UV 5200

item number

100 08 000­

consists of:

Cable reel

• for 180 m/590 ft curing cable (max. 200 m/656 ft cable length possible)
• extension arm with deflection roller to ensure minimum bending radius of the cable
• all connections are hard-wired
• emergency operation via hand crank in case of power failure
• PLC with control panel

Curing cable

• hybrid cable assembled with plugs at both ends
• temperature resistant cable up to 150 °C/302 °F

Power supply

• central supply point according to VDE three-phase AC current

UVA-ignition system

• ignition control and protection of load circuit for 8 bulbs

Control unit

•  industrial control with touch panel
• software, machine control, measurement data acquisition and evaluation
• software to read out data with an external PC (Windows)

Light source from DN 150/6″

• Light source chain for 8 UVA lamps
• Navigation of 90° bends at bend radius ≥ 3 x DN, core diameter 82 mm
• 8 pcs UVA lamps 400 Watt, type: IMS Pipe Technology

Temperature resistant color camera in aluminum housing
Tablet – PC (016 54 060) with video recording software
Basic end can set (DN 150-300/6“-12”)
Deflection rollers set for curing cable
Ratchet straps and pull-in belts

UV 5200

item number

100 08 000

• Cable reel
  – for 180 m/590 ft curing cable (max. 200 m/656 ft cable length
  possible)
  – stainless steel chassis
  – cable reel speed 0.05-2 m/min, controllable via PLC/industrial
  control with touch panel
  – extension arm with deflection roller to ensure minimum
  bending radius of the cable
  – all connections are hard-wired
  – emergency operation via hand crank in case of power failure
  – PLC with control panel for cable reel control and emergency
  operation during control panel failure
• Curing cable
  – hybrid cable assembled with plugs at both ends
  – temperature resistant cable up to 150 °C/302 °F
  – 180 m/590 ft cable length, if desired, up to 200 m/656 ft
  possible
  – cable lengths vary up to 205 m/672 ft due to the production
  process, cable is measured during hand-over, extra lengths
  > 180 m/590 ft will be invoiced
• Power supply
  – central supply point according to VDE three-phase AC current
  – main switch
• UVA-ignition system
  – ignition control and protection of load circuit for 8 bulbs
  – selection switch (PLC/emergency operation)
  – lamp wattage selectable/dimmable between 400 W and 650 W
  – current control and power measurement per bulb
  – emergency stop for bulbs and cable reel
  – drive control for cable reel
  – all connections are hard-wired
  – emergency operation and status display for each lamp
  (in case of PLC failure)
• Control unit
  – industrial control with touch panel, incl. required wiring and
  interface for connection to the curing system
  – software, machine control, measurement data acquisition
  and evaluation
  – software for system control and recording of all relevant
  quality data
  – software to read out data with an external PC (Windows)
  – data export by USB or network as PDF-document (without
  possibility of data alteration). Software for data reading must
  be installed on PC (Windows)
  – program for tightness test (according to EN 1610 and additional
  European standards incl.printable protocol)
  – remote service software
  – W-LAN interface
  – lamp operating hours counter per lamp
  – The following data are recorded:
  sewer pipe section data and Liner data / date and time /
  internal pressure of the Liner / distance / speed of the light
  source / air temperature inside the Liner at the light source
  (via sensor) / surface temperature (via IR-sensor) /
  error messages / lamp performance
• Light source from DN 150/6″
  – Light source chain for 8 UVA lamps
  – Navigation of 90° bends at bend radius ≥ 3 x DN, core
  diameter 82 mm
  – Smallest diameter of light source with wheels retracted
  110 mm, including camera mount
  – Sensor for air temperature measurement (PT100)
  – 2 surface temperature measuring device (pyrometer)
  – 40 pcs. dual wheels, spring-cushioned, plug-in type for
  DN 150 (36 pcs + 4 spares)
  – 40 pcs. dual wheels, spring-cushioned, plug-in type for
  DN 200 / DN 225 (36 pcs + 4 spares)
  – 40 pcs. dual wheels, spring-cushioned, plug-in type for
  DN 250 (36 pcs + 4 spares)
  – 40 pcs. dual wheels, spring-cushioned, plug-in type for
  DN 300 / DN 350 / DN 375 / DN 400 (36 pcs + 4 spares)
  – 20 pcs. single wheels, spring-cushioned, screw type for
  camera head (16 pcs + 4 spares)
  – non-centric light source position from > DN 400
  – Length: 3150 mm / 10,3 ft ft, weight 13 kg, diameter without
  wheels: 85 mm / 3,4”
  – 8 pcs UVA lamps 400 Watt, type: IMS Pipe Technology
• Temperature resistant color camera in aluminum housing
  – PA- signal, fixed focus, light control
  – camera control
  – video output (analogue, PAL, coaxial)
• Tablet – PC (016 54 060) with video recording software
  – 10,1″ (25,65 cm) multitouch display
  – multitouch display suitable for operation with gloves
  – operating system: Windows 8.1 Pro
  – software for recording and playback of the video signal
  – 4 GB main memory
  – 128 GB EMMC energy-saving flash memory
  – Micro-SD card slot to 2 TB
  – WLAN, Bluetooth, GPS/GLONASS, RFID
  – USB 2.0
  – Audio 3.5 mm
  – Micro-USB charger connection
  – protected against dirt and splash water according to IP65
  – 20 months warranty (excluded battery)
  – MIL spec drop resistance
  – W 269 x H 180.7 x D 12.5 mm/W 10.6″ x H 7.1″ x D 0.5″
  – approx. 758 g weight
• Basic end can set (DN 150-300/6“-12”)
  Consisting of stainless steel with retaining ring
  – 2 end cans for DN 150-180/6“-7“
  – 1 end can for DN 200/8”
  – 1 end can for DN 250/10”
  – 1 end can for DN 300/12”
  – 2 Venturi nozzles for curing cable (1 required/1 reserve)
  – 3 Venturi nozzles  for rope of the winch(2 required/1 reserve)
  – 3 nozzle holder with ring bolt (2 required/1 reserve)
  – 2 adapter for compressor connection (also usable as adapter for
  Storz 52-C)
  – pressure measuring hose 10 m/33 ft
• Connections:
  – 1 connector for Storz 75-B. Connection of compressor via
  adapter possible
  – 1 connector for the pressure measuring hose
• Deflection rollers set for curing cable
  – 2 deflection rollers for the UV curing cable with suitable
  diameter
• Ratchet straps and pull-in belts
  – 6 ratchet straps up to DN 300/12”
  – 6 ratchet straps from DN 300/12”
  – 1 pull-in belt up to DN 300/12”
  – 1 pull-in belt DN 300-600/12”-24”
  – 1 pull-in belt DN 600/24”

This product is not available for rental at the moment.